Water Treatment
Plants (WTP)
Custom-engineered water treatment systems for industrial process water, drinking water and utility water supply from surface, borewell and municipal sources across India.
Reliable Water Treatment for Industrial, Commercial and Municipal Applications
Vannsol designs and installs Water Treatment Plants for industries, institutions and municipalities that need consistent, high-quality treated water from raw surface water, borewell water or municipal supply. Every WTP is designed after a complete source water analysis covering turbidity, TDS, hardness, iron, manganese, microbial load and seasonal variation.
Whether you need potable water for a township, process water for a manufacturing plant or utility water for a large commercial facility, we engineer the right multi-stage treatment sequence for your source and your application.
Clean Water Engineering
From Raw Source Water
to Treatment-Grade Output
Why Vannsol
Water quality varies drastically by source, season and location. Your WTP must be designed for your actual water, not average water.
We Analyse Your Source Water Before Designing Any Treatment Sequence.
River water, canal water, borewell water and municipal supply each carry different contaminants in different concentrations at different times of year. We test your actual source, map seasonal variation and design a WTP that handles your worst-case water quality, not just average conditions.
Multi-Stage Treatment
Coagulation, flocculation, sedimentation, filtration and disinfection stages combined as needed for your source.
BIS and WHO Standards
Potable water systems designed to meet Bureau of Indian Standards IS 10500 and WHO drinking water guidelines.
Automation and Monitoring
Online turbidity, pH and chlorine monitoring with automatic dosing control for consistent treated water quality.
Applications
WTP systems designed and installed across these uses and sectors.
Treatment Process
Multi-stage process from raw source water to clean treated output.
01
Source Water Analysis
Turbidity, TDS, hardness, iron, manganese, bacteria and seasonal parameters tested.
02
Treatment Design
Multi-stage treatment sequence and dosing system designed for your source water data.
03
Fabrication and Civil
Equipment fabricated, civil tanks constructed and all systems installed at your site.
04
Commissioning
System commissioned, treated water tested against BIS or process standards and handed over.
System Features
Standard specifications on every Vannsol WTP.
Capacity from 10 KLD to 500 KLD for industrial, institutional and municipal use
Coagulation and flocculation with automatic chemical dosing for turbidity removal
Sedimentation and clarification for suspended solids and colour reduction
Multimedia rapid sand filtration for final turbidity polishing
Activated carbon filtration for taste, odour and organic matter removal
UV and chlorination disinfection for microbial safety in potable systems
Online monitoring of turbidity, pH, chlorine residual and flow
AMC and spare parts support available after commissioning
Not Getting Consistent
Water Quality at Your Site?
Share your source water type, daily requirement and quality issues. Our engineers will design the right treatment system for your application and location.
Frequently Asked Questions
Common questions about water treatment plant design and installation.
A WTP removes physical contaminants like turbidity, suspended solids, colour, iron and bacteria using coagulation, filtration and disinfection. An RO plant removes dissolved salts and TDS using high-pressure membranes. Many applications need both — a WTP as pretreatment before an RO system for complete water purification.
